Back in 2009…rustic was in. Then it was out and now….it is back in for the 2011/2012 wedding season! So with that in mind, I don’t think anything says more "woodland rustic chic" than a cakstand made out of real wood. Are you throwing an indoor wedding and having difficulty bringing the outdoors in? How about surprising guests with 4- 5 log stands on a dessert table with mini cakes and pies on top and flowers scattered everywhere? Laurie, thank you again for such a lovely project!
What You’ll Need
A Cross-Cut Wood Plaque (round or oval)
A Cross-Section of a Tree Limb (Make sure the top and bottom are parallel)
Titebond Ultimate Wood Glue (or a similar extra strong wood glue)
A Large Wood Clamp
Cross-cut wood plaques can be found in your local craft store or online at Hofcraft.
The come in a variety of sizes ranging from 5 inches to 12 inches in
diameter. They are usually found in the section with the wood-burning
kits and other wood crafts. They are clean, sanded and ready to use.
1. Take your tree limb section and wipe the cut surface clean.
Put a generous amount of extra strong wood glue on the surface. (see
2. Place the limb section in the center of the back side your
wood plaque and press down firmly. Wipe away any excess glue with a
clean, damp cloth. (see figure 2)
3. Place the two joined pieces in a wood clamp and let dry for at
least one hour. If you don’t have a wood clamp, you can stack a few
heavy books on top of your pedestal until it’s dry. (see figure 3)
4. Use your pedestals to display cakes and desserts (see figure
4) or use as a base for a centerpiece. If you want to place food
directly on the wood surface, coat it first with a food-safe wood
sealer. If you would like to keep the wood it’s natural color, place a
piece of parchment paper beneath your cake or dessert.
What it Cost
Wood Plaques $3.99 – $5.99 each
Tree Limb – Free from our wood pile!
Wood Glue – $3.35